Device Type:

HPLC detector

Device Driver:

Dionex: PDA-100 Detector

Hardware Options
Supported:

PDA-100 Photodiode Array Detector

Licenses:

Timebase Class 1 or
To allow acquisition of 3D data:
Timebase Class 1 + 3-D Data Acquisition

Connection:

Required components (included in shipment):

• DX-LAN interface card (also, refer to  Installing the DX-LAN Card)

• Crossover cable, approx. 3 m (Dionex part no. 960280)

To install several PDA-100 detectors (number = n), you need the following components instead of the crossover cable:

• (n+1) DX-LAN cables (Dionex part no. 960281) with an Ethernet switch (Dionex part no. 061610 in North America; Dionex part no. 061655 outside North America)

Control Panel:

For example: HPLC_Summit.pan (PDA-100 as part of an HPLC system)

Operating Principle:

Photodiode Array Detectors

Wavelength Range ([nm])

190 - 800

Wavelength Accuracy ([nm])

± 1

Light Sources

Deuterium lamp (30 W) for UV spectra

Tungsten lamp (15 W) for visible spectra

Pixel Resolution ([nm])

0.7

Noise

± 10 mAU; 2 sec rise time, 254 nm, 4 nm bandwidth

± 15 mAU; 2 sec rise time, 520 nm, 10 nm bandwidth

Drift (mAU/h)

<500 (after warm-up)

Linearity (AU)

>2